Are you looking for the Best 3D Printer Controller? Based on expert reviews, we ranked them. We’ve listed our top-ranked picks, including the top-selling . Having trouble finding a great ? This problem is well understood by us because we have gone through the entire Best 3D Printer Controller research process ourselves, which is why we have put together a comprehensive list available in the market today. See our ranking below!
Best 3D Printer Controller Types of Comparison Tables
What is Best 3D Printer Controller review ?
CNC 3D Printer Driver Kit, MYSWEETY 39PCS 3D Printer CNC Module Kit, 3D Printer CNC Controller Kit, Nema 17 Stepper Motor & Stepper Motor Driver with Heat Sink
- 〖3D Printer CNC Kit〗- This is a professional 3D printer DIY kit, with many types of modules or components you need. For beginners and professionals, this is a good combination. Will meet your different needs of learning or experiment.
- 〖Nema 17 Stepper Motor〗- Stepper motor is 84 oz.in (59 Ncm) 47mm Body 1.8 degree with Mounting Bracket Kit DIY 3D Printer CNC Robot with 3pcs Mounting Bracket and 12pcs M3 Screws.
- 〖Latest CNC Shield Expansion Board V3.0〗- The CNC Shield Board is an updated version of version 3.0, which is suitable for CH340G Shield 3.0 version compatible with ArduinoIDE, GRBL 0.9.
- 〖Stepper Motor Driver with Heat Sinks〗- The superior stepper motor driver with four aluminum coolers runs in 2.5A current(maximum), compatible with ArduinoIDE software and hardware.
- 〖Easy to Install〗- The installation method of this product is very simple, including CNC shield board, stepping motor, mounting bracket, aluminum heat sinks, bracket screws, etc. You do not need to purchase this part extra.
3D Printer CNC Controller Kit with for ArduinoIDE, Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema 17 Stepper Motor LKB02
- ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
- ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
- ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
- ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
- ★ Good after-sales service. We'll respond within 24 hours for any questions.
BIQU A4988 Compatible StepStick Stepper Motor Diver Module with Heat Sink for 3D Printer Controller Ramps 1.4(Pack of 5pcs)
- A4988 driver board widely used in 3D printers and small CNC machines
- Simple step and direction control interface
- Thermal protection, over-current protection, ground fault protection
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage toachieve higher step rates
3D Printer Controller Kit RepRap, RAMPS 1.4 + 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display 3D Printer Controller Kit
- 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
- RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an for Arduino shield for easy service, part replacement, upgrade-ability and expansion. for Additionally, a number of for Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
- LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
- A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product.
- Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)
HiLetgo 3D Printer Reprap Smart Controller 12864 LCD Display with Smart Controller Board for 3D Printer RAMPS 1.4 Reprap Mendel Prusa for Arduino 128x64 LCD Blue Color
BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3, with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts
- 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
- 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
- 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
- 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
Eiechip CNC 3D Printer Kit for Arduino Mega 2560 R3 + RAMPS 1.4 Controller + LCD 2004 + 6X Limit Switch Endstop + 5 A4988 Stepper Driver 3D Printer Interface & Driver Modules
- 3D Printer Accessories Set meets most needs. Including CNC Shield V3.0, UNO R3 Board, A4988 StepStick Stepper Motor Module.
- The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers.
- It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors.
- Each channel of stepper motor only needs 2 IO ports, which means 8 IO ports is sufficient to manage 3 stepper motors.
- This shield can make quick work for managing stepper motors in your project.
KEYESTUDIO 3D Printer Controller Board RAMPS 1.4 REPRAP Mendel PRUSA with Stepper Jumper Screw Terminal Block for Arduino Mega and ramps 1.4 Projects
- It has total 5 slots for stepper motor drive module to drive 5-channel stepper motors. The slots are compatible with all kinds of drive modules like A4988, DEV8825.
- There are 3 jumper caps under each slot, which can be used to control the working subdivision of drive modules.
- For example, if connect the A4988 and plug three jumpers, the subdivision port MS1、MS2 and MS3 of A4988 module are at active HIGH, so the A4988 module is in 16-subdivision working mode.
- But if unplug the three jumpers, MS1、MS2 and MS3 of A4988 module are at active LOW, so the A4988 module is in full-step working mode.
HiLetgo RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board for Arduino Mega 2560
- The fifth stepper motor output port can be customized as a Z-axis motor or a second extruder.
- Can be extended to control other accessories.
- Three field effect transistors, three heater / fan output ports, three thermistor circuits.
- Heated bed control, extra 11A fuse.
- Pololu board foot socket, can be easily replaced or removed.